Home / SNOW GUARDS / FOR SLATE ROOFS / BERGER SNOWGUARDS / Berger SG2 Bronze or Iron Snowguard
Berger SG2 Bronze or Iron Snowguard
Berger SG2 Bronze or Iron Snow Guards for Slate Roofs

Berger SG2 Bronze or Iron Snowguard

Sign in to rate
SNOW GUARD - Berger Model SG2 Bronze or Galvanized Iron
 
NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
 
Select metal type below.

Five inches wide, 2 3/4 inches high. The riveted bar is 1/8 inches x 1 inch x 12 inches long and goes 8 inches under the slate and between the slate course.  Installation technique is similar to the Sieger snow rail bracket in that the underlying slate is notched to allow for the snowguard strap (
click here to see the technique illustrated on a Sieger snow rail bracket being installed on an existing slate roof).
 
These snow guards are also suited for wood shake, tile and mineral surfaced shingles. Excellent in areas that receive heavy snows! This snow guard is to be installed during the slate roof installation - it is not a retrofit model.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

The following recommendation is for a typical application, slate size 12 inches x 18 inches, with a 7.5 inches exposure, and a roof pitch of 12/12 (45 degrees). This is a typical example, and can be used and adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.

Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.



DON'T FORGET STAINLESS STEEL SCREWS
 
 
 
ONLINE SNOWGUARD LAYOUT REQUEST

CAD DRAWING

DOWNLOAD OUR SNOWGUARD CATALOG

BACK TO SNOW GUARD WAREHOUSE


IMPORTANT NOTE ABOUT SHIPPING RATES: We can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.
Details
SKU 128
Weight 1.00 lbs
Our price: $19.99
Click here to be notified of price drops of this item
 
Options
Select the metal type!
Quantity

Send to friend

: *
: *
: *
 

Related products

COPPER SMOOTH SHANK ROOFING NAILS - 1 pound lots 1.5 inch long Slate Roofing Pro Tool Set, 3 Piece Slate Ripper Stortz 84A
$8.90
$253.00
$87.00
Standard Size Copper Slate Hooks 1 Pound Lots Stainless Steel Screws 5 Pound Boxes
$12.00
$65.00

Customers also bought

COPPER SMOOTH SHANK ROOFING NAILS - 25 pound box, 2, 2.5 or 3 inch SLATE CUTTER - Stortz 51-C Genuine STAINLESS STEEL RING SHANK ROOFING NAILS - 25 pound box, 2, 2.5 or 3 inch
$220.00
$390.00
$159.00

Customer feedback

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.