Home / SNOW GUARDS / FOR SLATE ROOFS / BERGER SNOWGUARDS / Berger SGC100 Copper Retrofit Snowguard
Berger SGC100 Copper Retrofit Snowguard
Berger SG100 Retrofit Snow Guards for Slate Roofs

Berger SGC100 Copper Retrofit Snowguard

SNOW GUARD - Berger Model SGC100 Copper Retrofit Style

NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
Copper Retrofit Snowguard (10.5 ounces weight per piece) - same style as the SGCP100, but without the extra reinforcement. 14 inch reach under slate to hook on nail.

Just slip this snow guard under the slate and hook on an existing slating nail. Berger has over 100 years of experience in manufacturing one of the most complete lines of snow retention products with a guard to fit nearly any type of roofing & budget, including slate.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

The following recommendation is for a typical application, slate size 12 inch x 18 inch, with a 7 1/2 inch exposure, and a roof pitch of 12/12 (45 degrees). This is a typical example, and can be used and adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.

Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.





IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.
SKU 106
Weight 0.85 lbs
Our price: $10.99
Click here to be notified of price drops of this item
: *
: *
: *
ACRO SLATERS ROOF BRACKETS MODEL 19600 - Box of 5 Berger SGCP100 Copper Pro Retrofit Snowguard Sieger SS2ACR Cast Aluminum 2-Pipe Snow Rail Bracket for Standing Seam Roofs

Customer Reviews

There have been no reviews for this product.