Home / SNOW GUARDS / SNOW FENCE AND RAILS FOR ROOFS / SNOW RAILS - Mullane Fitrite 2 and 3 pipe

Buy a black slate hammer and get one free! We are over-stocked!

SNOW RAILS - Mullane Fitrite 2 and 3 pipe
Mullane Fitrite Snow Rail Systems at Snow Guard Warehouse

SNOW RAILS - Mullane Fitrite 2 and 3 pipe

Sign in to rate
MULLANE FITRITE SNOW RAILS: 2 Pipe and 3-Pipe, Brass and Iron
 
 
Please call us at 814-786-9085 or Email in order to determine availability and pricing. You cannot order these items from this page. We have several types of 2-pipe snow rail systems. Check the pricing in our Snowguard Catalog.
 
NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
 
 
 

Mullane Fitrite # 121 TWO PIPE: The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11 gauge galvanized steel plate. The brackets accommodate two .080 inch (od) galvanized pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snow falls. The Fitrite #121 is a custom order and the base plate can be fabricated to any specified size. 1/2 inch Galvanized Pipe, Couplings and End Caps sold separately.
 
 
Mullane Fitrite # 122 TWO PIPE: The Model #122 Snow Fence Bracket is cast in bronze for durability. The castings are mounted on an 11 gauge galvanized steel plate. The brackets accommodate two .080 inch (od) brass pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snow falls. The Fitrite #122 is a custom order and the base plate can be fabricated to any specified size. 1/2 inch Red Brass Pipe, Couplings and End Caps sold separately.
 
 
 
Mullane Fitrite # 124 TWO PIPE: The Fitrite #124 Mini Protector Snow Fence Bracket is cast in malleable iron for durability. The castings are mounted on a solid galvanized steel plate, 2 inch x 12 inch, with predrilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2 inch galvanized pipes. Brackets are adjustable to the roof pitch. The Model #124 should be used only where low to moderate snowloads are anticipated and can be mounted to most any roof surface. The Fitrite #124 is available in cast bronze or galvanized malleable iron. 1/2 inch Red Brass Pipe or 1/2 inch Galvanized Pipe, Couplings and End Caps sold separately.
 
 
 
Mullane Fitrite #131 THREE PIPE: The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3 galvanized iron, bronze, brass or stainless steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. The brackets are adjustable to various roof pitches. The base plate is 11 gauge galvanized steel, sized to the slate dimension, and predrilled and countersunk for fasteners. Bolts are Grade 5 zinc plated steel. The Fitrite #131 is a custom order and the base plate can be fabricated to any specified size. 3/4 inch Galvanized Pipe, Couplings and End Caps sold separately.
 
 
Mullane Fitrite # 132 THREE PIPE:  The Model #132 Snow Fence Bracket is cast from solid bronze for durability. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. The Model #132 accommodates 3 brass, bronze or stainless steel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. The base plate is 1/8 inch commercial bronze or brass plate, sized to the slate dimension, and predrilled and countersunk for fasteners. Bolts are solid brass. The Fitrite #132 is a custom order and the base plate can be fabricated to any specified size. 3/4 inch Red Brass Pipe, Couplings and End Caps sold separately.
 
Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding off the roof under the rails and creating a fall hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.

Snow rail fence brackets are installed parallel to, and approximately 24 inch to 36 inch from the eaves. The brackets should be spaced from 18-24 inches to no more than 42 inches - 48 inches apart, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass or stainless steel pipe is recommended, (copper water pipe should not be used). High snow load areas should use a three pipe system such as the Mullane 500. If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.
 
 
 
 
 
Details
SKU SKU16354
Call For Price:
Toll Free 1-866-641-7141

Send to friend

: *
: *
: *
 

Related products

Sieger SS2BCR Bronze 2-Pipe Standing Seam Snow Rail Bracket Sieger SS2ACR Cast Aluminum 2-Pipe Snow Rail Bracket for Standing Seam Roofs Sieger ContRodA 3-pipe Cast Aluminum Snow Rail Bracket for Slate Roofs
$26.99
$11.99
$14.99
Slate Roof Bible, 3rd Edition Slate Roof Data Stick with Videos
$49.00
$49.00

Customers also bought

SNOW GUARD - Berger SGLLC1 Copper Loop the Loop, Case of 300 #45 Copper Strap Ridge Point Base for Lightning Rod or Finial Slate Roof Bible Ebook, 3rd Edition Electronic PDF Download
$599.00
$15.00
$25.00

Customer feedback

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.