Home / SNOW GUARDS / SNOW FENCE AND RAILS FOR ROOFS / SNOW RAIL - Mullane 500 3-Pipe Brass

Buy a black slate hammer and get one free! We are over-stocked!

SNOW RAIL - Mullane 500 3-Pipe Brass
Mullane 500 Brass and Bronze 3-Pipe Snow Rail System sold at the Snow Guard Warehouse

SNOW RAIL - Mullane 500 3-Pipe Brass

Sign in to rate
SNOW RAIL - Mullane 500 Three Pipe, Brass and Bronze
 

Please call us at 814-786-9085 or Email in order to determine availability and pricing. You cannot order these items from this page. Check the pricing in our Snowguard Catalog.

The Model #500 Snow Fence Bracket is cast from solid bronze for lifetime durability. The castings have been carefully engineered to assure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard, and give redundant protection against casting failure when under load. Holes for rails are 1.125 inches to accommodate 1.05 inch (od) brass pipe. The brackets are available in three angles: 90, 67.5, and 45 degrees. The base plate is 1/8 inch 220 bronze. The Model #500 is typically installed along the perimeter of slate roofs with rafters up to 25 feet in areas with moderate to high snow falls. The Model #500 is a custom order and the base plate can be fabricated to any specified size. 3/4 inch Red Brass Pipe, Couplings and End Caps sold separately. Please call us at 814-786-9085 or Email  for more information.  

NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!

 
 
 
Download Mullane 500 3D

Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding off the roof under the rails and creating a fall hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.



Snow rail fence brackets are installed parallel to, and approximately 24 inches to 36 inches from the eaves. The brackets should be spaced from 18-24 inches to no more than 42 inches to 48 inches apart, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass or stainless steel pipe is recommended, (copper water pipe should not be used). High snow load areas should use a three pipe system such as the Mullane 500. If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.

You can roughly expect to pay about $100.00 per running foot for a 3-rail Mullane 500 system, plus shipping and installation costs. Add another $10.00 per foot for stainless steel expanded wire mesh (prices subject to change), used to keep smaller objects, such as slates, from falling through the rails.
 
 
 
 
 
 
Details
SKU SKU16353
Call For Price:
Toll Free 1-866-641-7141

Send to friend

: *
: *
: *
 

Related products

Sieger SS2BCR Bronze 2-Pipe Standing Seam Snow Rail Bracket Sieger SS2ACR Cast Aluminum 2-Pipe Snow Rail Bracket for Standing Seam Roofs Sieger Snow Rail Bronze 3-Pipe Rod Bracket for Slate Roofs
$26.99
$11.99
$37.99
Sieger ContRodA 3-pipe Cast Aluminum Snow Rail Bracket for Slate Roofs Slate Roof Bible, 3rd Edition Slate Roof Data Stick with Videos
$14.99
$49.00
$49.00
SNOW RAILS - Mullane Fitrite 2 and 3 pipe
Call For Price:
Toll Free 1-866-641-7141

Customers also bought

Plastic Balls for Lightning Rods or Weathervanes 36 inches long copper point for lightning rods, 1/2 inch diameter Copper Conductor Head - Salvo #208
$4.00
$29.00
$320.00

Customer feedback

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.