Home / FASTENERS / SLATE HOOKS / Standard Black Stainless Steel Slate Hooks - 1 pound lots
Standard Black Stainless Steel Slate Hooks - 1 pound lots
Stainless steel slate hooks sold at the Slate Roof Warehouse

Standard Black Stainless Steel Slate Hooks - 1 pound lots

Black Anodized
0.1200 gauge - by the pound (about 81 hooks/lb), blunt (not sharp) points for safety. For up to 3 inch headlap. Great for repairing asbestos shingle roofs too. Black anodized hooks blend in on the roof so they are relatively invisible.
We also sell oversize (large) slate hooks, by the pound.

We also sell copper slate hooks.

Stainless steel hooks are stronger than Copper slate hooks and are recommended whenever the roof decking is hard, as on old oak roof boards, or even old yellow pine, both of which tend to bend copper slate hooks.

Slate hooks are used to install replacement slates during repairs, and for replacing slates left out during the installation of a new slate roof where the scaffolding (roof jacks) are temporarily nailed onto the roof.

Some slaters use nothing but slate hooks for repair work. They may be easier to use than the nail and bib technique for the inexperienced person, and are certainly easier than the nail and bib when working with new or especially hard slates. It's always a good idea to have some of these hooks on hand. Can be used on most asbestos roofs too. For repair instructions, watch the video below.

Copper slate hooks  are more invisible on a slate roof than mill finish stainless steel ones (black anodized stainless hooks are relatively invisible). Stainless hooks are stronger that copper and will nail into harder roof decking without bending. So if you're nailing into a softwood deck, copper or stainless hooks are fine. If the deck is hard, use stainless steel.

Asbestos tile roof repair using slate hooks. 

How to adapt a standard slate hook for use on thicker slates or tiles.
SKU 18
Weight 1.25 lbs
Our price: $13.70
Click here to be notified of price drops of this item
: *
: *
: *
Berger SGSP100 Stainless Pro Retrofit Snowguard BAR SOLDER - 1/2 pound bars 50:50 BAR SOLDER - Capping bars 50:50

Customer Reviews

There have been no reviews for this product.