Features

• Paintable
• Fast Cure
• Will not Crack
• Non-Sag & Slump
• Approved for high wind areas
• Ultra Clear Formula
• Reduces Tile Chatter & Shifting
• Excellent Adhesion to many Roof Substrates

 Applications

• Field Tile Repair
• Roof Applications
• Siding & Trim Applications
• Gutter & Sheet Metal Applications

Specifications

HOW TO USE: For Best Results, make sure surface is clean, dry and free of oil or grease. Cut nozzle to desired bead size and puncture inner seal. Apply with a caulking gun forcing sealant onto the substrate, then tool if needed. Sealant will gain a skin in 3-5 minutes and exhibit full cure within 3-4 days. Can be applied in warm or cold conditions. Clean excess material with mineral spirits or similar solvent. It is the user's responsibility to thoroughly test any proposed uses with any and/or all substrates.

COLOR: Ultra Clear

PACKAGING: 10.1 oz cartridges, Fixed-Tip Nozzles

STORAGE LIFE: Material is to be stored under controlled dry environment (below 75 F°). Use within 12 months from date of manufacture.

SPECIFICATIONS: TT-S-0230C

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects and/or reproductive harm.

NOTICE: This product does not eliminate the use of mechanical fasteners. Contact your manufacture for best installation methods. Use caution in high wind area's.

LIMITED LIFETIME WARRANTY: This product is guaranteed to give satisfactory performance if applied in accordance with the label directions. Liability to Premier Industrial Supply, Inc. (Premier) is limited to a full refund of the purchase price or product replacement if product is proven defective. Premier shall not be liable for loss or damage, whether direct, consequential or incidental. There are no other warranties expressed or implied including the implied warranty of merchantability or fitness for a particular purpose.