Ez Pot Pro Solder Pot - Joseph Jenkins, Inc. Internet Sales

EZ POT PRO is a lightweight portable fire pot for heating hand irons, made to be used on a roof. It runs off a small propane cylinder (not included) and is very portable. A refillable 14 oz propane bottle will keep your irons hot for a continuous 8 hours. Transfer hose available for standard propane fittings. Hand irons are NOT included.

Why drag an old fire pot with a 5 gallon propane tank on a roof? Because you need your soldering irons nearby, hot, and enough gas for the job, Right? That's why we sell the Ez-Pot Pro System, a lightweight portable fire pot made to be used on a roof. No more jury-rigged 5 gallon propane bottle bracing, just a 14 oz bottle will last 8 hours.

Ultra-Reliable Goss torch fittings included. Stainless hardware for long life. Made in the USA. Enclosed on five sides for wind protection. Insulated stainless steel liner. High Grade adjustment hardware allows the safe use of the fire pot on any roof angle.

The old propane firepots were not designed to heat soldering coppers, but were rather intended for plumbers to melt lead in pots with which to seal the transverse joints of cast iron waste lines. They are highly inefficient, sending about 90% of the produced heat into the air, and sending out a lot of pollutants in the process.

In addition, they are highly affected by even the slightest breezes, causing the workers to cease their soldering when the wind comes up. The EZ-POT PRO addresses and solves ALL of these problems while heating faster and more efficiently. An old propane firepot is a real handful to carry up ladders, weighing around 32 lbs. with a full tank. The EZ-POT PRO weighs in at almost exactly 5lbs.

A 5 gallon propane tank is round and cumbersome, very difficult to wrestle around, and especially difficult to stabilize on pitched roofs, which is not good for something with an open flame on a bare wood roof sheeting, and typically with several piles of construction debris as a landing site when it rolls off the roof. The EZ-POT PRO is stable and has an anchor cable system.

The Ez-Pot Pro is small enough to fit in a large shoebox. It can be easily stored and locked in a toolbox, making it unnecessary to chain and lock it in the back of a pickup truck or bring it into the shop at night, as is the common practice with the old firepots.

Read more about the EZPot Pro!

BACK TO SOLDER WAREHOUSE

Details


SKU	9
Weight	20.00 lbs
Price:	$295.00

Options

Quantity

Add to cart

Add to wish list