Cart is empty    
 
Categories
Aviation Snips
Bib Flashings
Books
Conductor Heads
Copper Finials
Drip Edge
Fall Protection
Flashing Rolls
Flashings
Gloves
Ladder Hooks
Lightning Protection
Pipe Flashings
Powerpoint
Ridge Metal
Rivets
Roof Brackets
Roof Caulk/Sealants
Roof Paint
Roof Vents
Roofing Nails
Sheet Metal Foot Shears
Sheet Metal Hand Brakes
Sheet Metal Slip Rolls
Slate Cutters
Slate Hammers
Slate Hooks
Slate Rippers
Slate Roof Consulting
Slaters Stakes
Slaters Tool Sets
SNOW GUARD WAREHOUSE
Solder Bars and Wire
Solder Supplies
SOLDER WAREHOUSE
Soldering Irons
Tongs/Seamers
Valleys
Videos
Weathervanes
Manufacturers

SLATE ROOF WAREHOUSE » SNOW GUARD WAREHOUSE » Snow Guards For Slate Roofs » Berger Brothers Snow Guards » SNOW GUARD - Berger SGC100HP

SNOW GUARD - Berger SGC100HP
SNOW GUARD - Berger SGC100HP
Click to enlarge   Click to enlarge
SNOW GUARD - Berger SGC100HP
 
A good, economy copper snow guard for new slate or asphalt roof installations (not a retrofit model). 9" long, 4" wide face, protrudes up from the roof about 3". Can also be soldered to a copper flat metal roof.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

The following recommendation is for a typical application, slate size 12" x 18", with a 7.5" exposure, and a roof pitch of 12/12 (45 degrees) and can be adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18'.

Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24" apart in the rows. Subsequent rows shall be spaced 30" vertically (4th slate course) and the guards offset 12" from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.

TECHNICAL SUPPORT:

Our technical advisers can answer many installation questions over the phone, or by email. For a detailed installation recommendation, a roof plan, with relevant elevations is requested, in order to properly determine quantity and placement of the specified product. Telephone: 800-523-8852 x 114 | Email: info@bronzeguard.com | Facsimile: +1 215-355-1023

INSTALLATION GUIDELINES

Berger will provide FREE CUSTOM LAYOUTS.

CAD drawings of Berger snow guards.

DOWNLOAD OUR SNOWGUARD CATALOG


BACK TO SNOW GUARD WAREHOUSE


IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.

Details
 
SKU 30
Weight 0.75 lbs
Price: $9.99

Options
 
Quantity

Add to cart
        
Add to wish list


Send to friend
Your name: *
Your e-mail: *
Recipient's e-mail: *

Send to friend

Your cart
Authentication

Information

Slate Roofing...
Help
News

Your e-mail:
Subscribe 
Users online:  40 unregistered customer(s)
Copyright © 2000-2012 SLATE ROOF WAREHOUSE